Carrello
Grips
Magazines
Muzzle breaks
Optics
Scope mount
Screws
Snap caps
Bipods
Firing pins
Gas block
Grips
Handguard
Magazines
Muzzle breaks
Optics
Rails
Scope mount
Screws
Sights
Snap caps
Stocks
Brushes
Cleaner
Lube
Rods
Brushes
Cleaner
Lube
Rods
Barrels
Bolts
Grips
Lower receivers
Mounts
Screwes
Springs
Triggers
Upper receivers
Barrels
Bolts
Grips
Lower receivers
Mounts
Revolver drums
Screwes
Springs
Triggers
Actions
Barrels
Bolts
Grips
Mounts
Screwes
Springs
Triggers
Actions
Barrels
Bolts
Grips
Mounts
Screwes
Springs
Triggers
Brass
Bullets
Primers
Brass
Bullets
Primers
Dies
Dispensers
Miscellaneous
Scales
RIFLE STOCK
THIS PRODUCT CAN BE SHIPPED TO
Austria, Belgium, Bulgaria, Canada, Cyprus, Croatia, Denmark, Estonia, Finland, France, Germany, Greece, Ireland, Italy, Latvia, Latvia, Luxemburg, Malta, Netherlands, Poland, Portugal, United Kingdom, Czech Republic, Romania, Slovak Republic, Slovenia, Spain, Sweden, Hungary, USA
PRODUCT DESCRIPTION
Chassis System with folding Stock in the rigth side. Modular hand guard with nigth vision scope base picatinny style.
7075 T6 material
Color : FDE - Black- ODG and gray
MATEBA ITALIA
Chassis system 7075 T6 with folding RH for Rem 700 Short Action
PRODUCT CODE: 65616400
PRICE:
€ 790
OUT OF STOCK
SIMILAR PRODUCTS
MDT Engineered Accuracy
TAC21Chassis Black for Remington 700 Short Action
Our TAC21™ remington 700 chassis is a combination of benchrest accuracy, superior ergonomics and specialized design. This chassis brings theRemington 700 to the next level in versatility and modularity, with an instant improvement in accuracy.
The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured out of aluminum hard anodized to mil spec type III, with a top full length MIL-STN-1913 accessories mounting rail. The built-in mounting rail has 20 MOA (Minutes of Angle) on the action housing and is parallel to the barrel axis on the fore-end. The TAC21™ chassis is designed to accept any AR-15 butt-stock and pistol grip (purchased seperately), offering the option to customize from the wide variety of accessories available on the market.
The TAC21™ chassis uses AICS style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, and supports installation of bolt on MIL-STN-1913 accessory mounting rails on the fore-end and side of the action housing. Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).
TAC21® chassis is engineered to minimize warping and distortion. The rifle receiver only makes contact with the TAC21™ chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel (diameter up to the receiver size – 1.350”), free floating.
SPECIFICATIONS
For Remingtion 700 Short Action and Long Action
Increases accuracy by up to 30%
Construction aluminum hard anodized to mil spec type III
Cerakote Finish in Black or Flat Dark Earth
20 MOA built in rail 1913
Holes for bolt on 1913 rails
Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
Lightweight, free-floating modular fore-end
Will accommodate barrels as thick as the action
AICS style magazine well for .223 or .308 (SA) and 300WM, 30.06, 338LM (LA)
Weight: 3 LB (SA) 3.5lb (LA)

€ 820
MDT Engineered Accuracy
TAC21Chassis FDE for Remington 700 Short Action
MDT TAC21  remington 700 chassis is a combination of benchrest accuracy, superior ergonomics and specialized design. This chassis brings theRemington 700 to the next level in versatility and modularity, with an instant improvement in accuracy.
The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured out of aluminum hard anodized to mil spec type III, with a top full length MIL-STN-1913 accessories mounting rail. The built-in mounting rail has 20 MOA (Minutes of Angle) on the action housing and is parallel to the barrel axis on the fore-end. The TAC21™ chassis is designed to accept any AR-15 butt-stock and pistol grip (purchased seperately), offering the option to customize from the wide variety of accessories available on the market.
The TAC21 chassis uses AICS style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, and supports installation of bolt on MIL-STN-1913 accessory mounting rails on the fore-end and side of the action housing. Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).
TAC21 chassis is engineered to minimize warping and distortion. The rifle receiver only makes contact with the TAC21 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel (diameter up to the receiver size – 1.350”), free floating.
SPECIFICATIONS
For Remingtion 700 Short Action and Long Action
Increases accuracy by up to 30%
Construction aluminum hard anodized to mil spec type III
Cerakote Finish in Black or Flat Dark Earth
20 MOA built in rail 1913
Holes for bolt on 1913 rails
Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
Lightweight, free-floating modular fore-end
Will accommodate barrels as thick as the action
AICS style magazine well for .223 or .308 (SA) and 300WM, 30.06, 338LM (LA)
Weight: 3 LB (SA) 3.5lb (LA)
€ 820
MDT Engineered Accuracy
TAC21Chassis FDE for Remington 700 Long Action.
MDT TAC21  remington 700 chassis is a combination of benchrest accuracy, superior ergonomics and specialized design. This chassis brings theRemington 700 to the next level in versatility and modularity, with an instant improvement in accuracy.
The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured out of aluminum hard anodized to mil spec type III, with a top full length MIL-STN-1913 accessories mounting rail. The built-in mounting rail has 20 MOA (Minutes of Angle) on the action housing and is parallel to the barrel axis on the fore-end. The TAC21™ chassis is designed to accept any AR-15 butt-stock and pistol grip (purchased seperately), offering the option to customize from the wide variety of accessories available on the market.
The TAC21 chassis uses AICS style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, and supports installation of bolt on MIL-STN-1913 accessory mounting rails on the fore-end and side of the action housing. Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).
TAC21 chassis is engineered to minimize warping and distortion. The rifle receiver only makes contact with the TAC21 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel (diameter up to the receiver size – 1.350”), free floating.
SPECIFICATIONS
For Remingtion 700 Short Action and Long Action
Increases accuracy by up to 30%
Construction aluminum hard anodized to mil spec type III
Cerakote Finish in Black or Flat Dark Earth
20 MOA built in rail 1913
Holes for bolt on 1913 rails
Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
Lightweight, free-floating modular fore-end
Will accommodate barrels as thick as the action
AICS style magazine well for .223 or .308 (SA) and 300WM, 30.06, 338LM (LA)
Weight: 3 LB (SA) 3.5lb (LA)
€ 925
MDT Engineered Accuracy
TAC21Chassis Black for Remington 700 LongAction
Our TAC21™ remington 700 chassis is a combination of benchrest accuracy, superior ergonomics and specialized design. This chassis brings theRemington 700 to the next level in versatility and modularity, with an instant improvement in accuracy.
The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured out of aluminum hard anodized to mil spec type III, with a top full length MIL-STN-1913 accessories mounting rail. The built-in mounting rail has 20 MOA (Minutes of Angle) on the action housing and is parallel to the barrel axis on the fore-end. The TAC21™ chassis is designed to accept any AR-15 butt-stock and pistol grip (purchased seperately), offering the option to customize from the wide variety of accessories available on the market.
The TAC21™ chassis uses AICS style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, and supports installation of bolt on MIL-STN-1913 accessory mounting rails on the fore-end and side of the action housing. Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).
TAC21® chassis is engineered to minimize warping and distortion. The rifle receiver only makes contact with the TAC21™ chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel (diameter up to the receiver size – 1.350”), free floating.
SPECIFICATIONS
For Remingtion 700 Short Action and Long Action
Increases accuracy by up to 30%
Construction aluminum hard anodized to mil spec type III
Cerakote Finish in Black or Flat Dark Earth
20 MOA built in rail 1913
Holes for bolt on 1913 rails
Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
Lightweight, free-floating modular fore-end
Will accommodate barrels as thick as the action
AICS style magazine well for .223 or .308 (SA) and 300WM, 30.06, 338LM (LA)
Weight: 3 LB (SA) 3.5lb (LA)
€ 890
MDT Engineered Accuracy
TAC21 Chassis FDE for Tikka Short Action
MDT TAC21  Tikka chassis is a combination of benchrest accuracy, superior ergonomics and specialized design. This chassis brings the Tikka to the next level in versatility and modularity, with an instant improvement in accuracy.
The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured out of aluminum hard anodized to mil spec type III, with a top full length MIL-STN-1913 accessories mounting rail. The built-in mounting rail has 20 MOA (Minutes of Angle) on the action housing and is parallel to the barrel axis on the fore-end. The TAC21™ chassis is designed to accept any AR-15 butt-stock and pistol grip (purchased seperately), offering the option to customize from the wide variety of accessories available on the market.
The TAC21 chassis uses AICS style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, and supports installation of bolt on MIL-STN-1913 accessory mounting rails on the fore-end and side of the action housing. Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).
TAC21 chassis is engineered to minimize warping and distortion. The rifle receiver only makes contact with the TAC21 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel (diameter up to the receiver size – 1.350”), free floating.
SPECIFICATIONS
For Tikka Short Action
Increases accuracy by up to 30%
Construction aluminum hard anodized to mil spec type III
Cerakote Finish in Black or Flat Dark Earth
20 MOA built in rail 1913
Holes for bolt on 1913 rails
Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
Lightweight, free-floating modular fore-end
Will accommodate barrels as thick as the action
AICS style magazine well for .223 or .308 (SA) and 300WM, 30.06, 338LM (LA)
Weight: 3 LB (SA) 3.5lb (LA)
€ 820
MDT Engineered Accuracy
LSS CHASSIS SYSTEM Black rem 700 Short Action
The MDT LSS Chassis provides a lightweight and versatile platform for your Remington 700. This drop-in chassis fits Short Action Remington 700 and accepts AICS style detachable magazines. Machined out of aluminum and finished with Cerakote, the LSS is ready to accept standard AR15 grips and collapsible stocks. Rifle receiver will only make contact with the chassis on the V-Shape bedding and recoil lug area, ensuring high accuracy and repeatability. Also, with the generous spacing on the handguard, standard and bull barrels will free float easily. Mounting holes on the forend are compatible with Magpul L5 and L3 rails. Available in black or flat dark earth. Does not accept AR15 grips with beavertail. Fixed Stock Adapter is required for use with fixed AR15 buttstocks.
€ 425
MDT Engineered Accuracy
LSS CHASSIS SYSTEM FDE Rem 700 short action
The MDT LSS Chassis provides a lightweight and versatile platform for your Remington 700. This drop-in chassis fits Short Action Remington 700 and accepts AICS style detachable magazines. Machined out of aluminum and finished with Cerakote, the LSS is ready to accept standard AR15 grips and collapsible stocks. Rifle receiver will only make contact with the chassis on the V-Shape bedding and recoil lug area, ensuring high accuracy and repeatability. Also, with the generous spacing on the handguard, standard and bull barrels will free float easily. Mounting holes on the forend are compatible with Magpul L5 and L3 rails. Available in black or flat dark earth. Does not accept AR15 grips with beavertail. Fixed Stock Adapter is required for use with fixed AR15 buttstocks.
€ 425
MDT Engineered Accuracy
Skeleton Rifle Buttsctock for LSS and TAC 21 color Black
The MDT Skeleton Rifle Stock is designed for MDT TAC21 and MDT LSS Chassis systems.
For the LSS Chassis, you will need the fixed stock adapter.

Length of Pull:
13.5" - 14.5" (34.3cm - 36.8cm ) on the TAC21.
14" - 15" ( 34.3cm - 36.8cm) on the LSS using the Fixed Stock Adapter.
€ 374.99
MDT Engineered Accuracy
TAC21 FDE for Savage 10 - 11 - 12 - 16 Short Action
MDT TAC21  Savage chassis is a combination of benchrest accuracy, superior ergonomics and specialized design. This chassis brings the Savage to the next level in versatility and modularity, with an instant improvement in accuracy.
The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured out of aluminum hard anodized to mil spec type III, with a top full length MIL-STN-1913 accessories mounting rail. The built-in mounting rail has 20 MOA (Minutes of Angle) on the action housing and is parallel to the barrel axis on the fore-end. The TAC21™ chassis is designed to accept any AR-15 butt-stock and pistol grip (purchased seperately), offering the option to customize from the wide variety of accessories available on the market.
The TAC21 chassis uses AICS style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, and supports installation of bolt on MIL-STN-1913 accessory mounting rails on the fore-end and side of the action housing. Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).
TAC21 chassis is engineered to minimize warping and distortion. The rifle receiver only makes contact with the TAC21 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel (diameter up to the receiver size – 1.350”), free floating.
SPECIFICATIONS
For Savage Short Action 10- 12 - 16
Increases accuracy by up to 30%
Construction aluminum hard anodized to mil spec type III
Cerakote Finish in Black or Flat Dark Earth
20 MOA built in rail 1913
Holes for bolt on 1913 rails
Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
Lightweight, free-floating modular fore-end
Will accommodate barrels as thick as the action
AICS style magazine well for .223 or .308 (SA) and 300WM, 30.06, 338LM (LA)
Weight: 3 LB (SA) 3.5lb (LA)
€ 835
MDT Engineered Accuracy
TAC21 black for Tikka short action
MDT TAC21  Tikka chassis is a combination of benchrest accuracy, superior ergonomics and specialized design. This chassis brings theTikka T3 to the next level in versatility and modularity, with an instant improvement in accuracy.
The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured out of aluminum hard anodized to mil spec type III, with a top full length MIL-STN-1913 accessories mounting rail. The built-in mounting rail has 20 MOA (Minutes of Angle) on the action housing and is parallel to the barrel axis on the fore-end. The TAC21™ chassis is designed to accept any AR-15 butt-stock and pistol grip (purchased seperately), offering the option to customize from the wide variety of accessories available on the market.
The TAC21 chassis uses AICS style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, and supports installation of bolt on MIL-STN-1913 accessory mounting rails on the fore-end and side of the action housing. Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).
TAC21 chassis is engineered to minimize warping and distortion. The rifle receiver only makes contact with the TAC21 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel (diameter up to the receiver size – 1.350”), free floating.
SPECIFICATIONS
For Tikka Short Action
Increases accuracy by up to 30%
Construction aluminum hard anodized to mil spec type III
Cerakote Finish in Black or Flat Dark Earth
20 MOA built in rail 1913
Holes for bolt on 1913 rails
Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
Lightweight, free-floating modular fore-end
Will accommodate barrels as thick as the action
AICS style magazine well for .223 or .308 (SA) and 300WM, 30.06, 338LM (LA)
Weight: 3 LB (SA) 3.5lb (LA)
€ 820
MDT Engineered Accuracy
LSS CHASSIS SYSTEM Black for Tikka for short caliber
The MDT LSS Chassis provides a lightweight and versatile platform for your Tikka. This drop-in chassis fits Short Action Tikka and accepts AICS style detachable magazines. Machined out of aluminum and finished with Cerakote, the LSS is ready to accept standard AR15 grips and collapsible stocks. Rifle receiver will only make contact with the chassis on the V-Shape bedding and recoil lug area, ensuring high accuracy and repeatability. Also, with the generous spacing on the handguard, standard and bull barrels will free float easily. Mounting holes on the forend are compatible with Magpul L5 and L3 rails. Available in black or flat dark earth. Does not accept AR15 grips with beavertail. Fixed Stock Adapter is required for use with fixed AR15 buttstocks.
€ 425
MDT Engineered Accuracy
LSS CHASSIS SYSTEM Black for Savage 10-11-12-16* azione corta
The MDT LSS Chassis provides a lightweight and versatile platform for your Savage. This drop-in chassis fits Short Action Savage and accepts AICS style detachable magazines. Machined out of aluminum and finished with Cerakote, the LSS is ready to accept standard AR15 grips and collapsible stocks. Rifle receiver will only make contact with the chassis on the V-Shape bedding and recoil lug area, ensuring high accuracy and repeatability. Also, with the generous spacing on the handguard, standard and bull barrels will free float easily. Mounting holes on the forend are compatible with Magpul L5 and L3 rails. Available in black or flat dark earth. Does not accept AR15 grips with beavertail. Fixed Stock Adapter is required for use with fixed AR15 buttstocks.
€ 425
MDT Engineered Accuracy
LSS CHASSIS SYSTEM FDE for Savage 10-11-12-16* Short Action RH
The MDT LSS Chassis provides a lightweight and versatile platform for your Savage 10-11-12-16*. This drop-in chassis fits Short Action Savage 10-11-12-16* and accepts AICS style detachable magazines. Machined out of aluminum and finished with Cerakote, the LSS is ready to accept standard AR15 grips and collapsible stocks. Rifle receiver will only make contact with the chassis on the V-Shape bedding and recoil lug area, ensuring high accuracy and repeatability. Also, with the generous spacing on the handguard, standard and bull barrels will free float easily. Mounting holes on the forend are compatible with Magpul L5 and L3 rails. Available in black or flat dark earth. Does not accept AR15 grips with beavertail. Fixed Stock Adapter is required for use with fixed AR15 buttstocks.
€ 425
MDT Engineered Accuracy
LSS CHASSIS SYSTEM ODG for SAVAGE 10 11 12 16 SA RH
The MDT LSS Chassis provides a lightweight and versatile platform for your Remington 700. This drop-in chassis fits Short Action Remington 700 and accepts AICS style detachable magazines. Machined out of aluminum and finished with Cerakote, the LSS is ready to accept standard AR15 grips and collapsible stocks. Rifle receiver will only make contact with the chassis on the V-Shape bedding and recoil lug area, ensuring high accuracy and repeatability. Also, with the generous spacing on the handguard, standard and bull barrels will free float easily. Mounting holes on the forend are compatible with Magpul L5 and L3 rails. Available in black or flat dark earth. Does not accept AR15 grips with beavertail. Fixed Stock Adapter is required for use with fixed AR15 buttstocks.

SPECS: Fits - Remington 700 Short Action rifles. Accepts AICS style short action magazines (223 & 308). Construction - aluminum. Finish - Cerakote. Accepts standard AR15 collapsible stocks. Accepts fixed stocks with adapter. Accepts AR15 grips WITHOUT beavertail.
€ 425
MDT Engineered Accuracy
Skeleton Rifle Buttsctock for LSS and TAC 21 color FDE
The MDT Skeleton Rifle Stock is designed for MDT TAC21 and MDT LSS Chassis systems.
For the LSS Chassis, you will need the fixed stock adapter.

Length of Pull:
13.5" - 14.5" (34.3cm - 36.8cm ) on the TAC21.
14" - 15" ( 34.3cm - 36.8cm) on the LSS using the Fixed Stock Adapter.
€ 374.99
MDT Engineered Accuracy
Fixed stock adapter for chassis LSS
€ 75.01
UTG
UTG PRO Made in USA 6-Position Mil-spec Stock Assembly model 4/15 RBU6DM
Detail Information:

U.S. Made Polymer Stock Assembly from Impact Resistant High-strength Material
U.S. Made Mil-spec Diameter Extension Tube from Aircraft Aluminum with Hard Anodizing
Built for Heavy-duty Operations with Tightest Tolerance Control
Complete with Action Spring, Buffer Assembly, Tear-drop Ring and Locking Ring
€ 89
UTG
M4/AR15 Combat Sniper Pistol Grip FDE RB-TPG172D
Detail Information:

UTG Model 4/15 Combat Sniper Grip with Ambidextrous Palm Swell, Thumb Rest & Trigger Finger Shelf for Optimal Control
Creative Ergonomic Design with Angled Grip for Best Overall Control and Most Reliable Performance
Molded from Impact Resistant Advanced Polymer
Features Hi-tech Anti-slip Texture for Firm Handling
Concealed Storage for Accessories
€ 25
MDT Engineered Accuracy
LSS CHASSIS SYSTEM Black rem 700 Long Action
The MDT LSS Chassis provides a lightweight and versatile platform for your Remington 700. This drop-in chassis fits long Action Remington 700 and accepts AICS style detachable magazines. Machined out of aluminum and finished with Cerakote, the LSS is ready to accept standard AR15 grips and collapsible stocks. Rifle receiver will only make contact with the chassis on the V-Shape bedding and recoil lug area, ensuring high accuracy and repeatability. Also, with the generous spacing on the handguard, standard and bull barrels will free float easily. Mounting holes on the forend are compatible with Magpul L5 and L3 rails. Available in black or flat dark earth. Does not accept AR15 grips with beavertail. Fixed Stock Adapter is required for use with fixed AR15 buttstocks.
€ 460
MDT Engineered Accuracy
LSS CHASSIS SYSTEM FDE Rem 700 Long Action
The MDT LSS Chassis provides a lightweight and versatile platform for your Remington 700. This drop-in chassis fits long Action Remington 700 and accepts AICS style detachable magazines. Machined out of aluminum and finished with Cerakote, the LSS is ready to accept standard AR15 grips and collapsible stocks. Rifle receiver will only make contact with the chassis on the V-Shape bedding and recoil lug area, ensuring high accuracy and repeatability. Also, with the generous spacing on the handguard, standard and bull barrels will free float easily. Mounting holes on the forend are compatible with Magpul L5 and L3 rails. Available in black or flat dark earth. Does not accept AR15 grips with beavertail. Fixed Stock Adapter is required for use with fixed AR15 buttstocks.
€ 460
UTG
model 4 8" S1 MIL-SPEC 6 POSITION STOCK ASSEMBLY RBUS1BM
Detail Information:

Proudly Designed and Made in USA
Built for Heavy-duty Operations with Tightest Tolerance Control Providing the Most Secure Fit and Silent Operation
Made in USA Stock Molded from Impact Resistant High-strength Polymer
Made in USA Mil-spec Diameter Extension Tube Precision Machined from Aircraft Aluminum with Rolled Threads and Hard Coat Anodizing for Best Corrosion and Wear Resistance
Featuring Built-in Rubberized Butt Pad, Chamfered Front and Rear Edges and Slanted Cheek Rest Surface Further Enhance Shooting Stability and Consistent Weapon Control
Dual Storage Compartment with Removable Waterproof Caps Provides Dry Storage or Batteries (Up to Six CR123) and/or Other Essential Accessories
Integral Ambidextrous Sling Loop and Reversible QD Sling Swivel Housing for Left or Right Handed Shooters
Extended 8 Lengths for Increased Length of Pull - Combine with our 15" Super Slim Handguards for Superior Weapons Handling
Includes Polymer Stock Assembly, Mil-spec 6 Position Extension Tube, Buffer, Buffer Spring, Tear-drop Ring and Castle Nut
€ 96
MDT Engineered Accuracy
LSS-XL chassis System Rem 700 long action ,black
The LSS-XL is a larger version of our LSS chassis system. The fore end has been extended by 3", and is designed to take fixed buttstocks without the need of an adapter.

The LSS-XL chassis system is a variant of our highly popular LSS chassis. The LSS chassis was designed for compact use, short barreled rifles. A large amount of customers really liked the LSS chassis, but wanted to use a fixed buttstock, and use it with longer barrel systems.

This prompted us to design the LSS-XL chassis system which has a fore-end extended by 3" and is designed to accept fixed rifle stocks without the need of using any adapters. In addition the Lengt of Pull (LOP) is 1" shorter than the standard LSS, as fixed rifle stocks generally are longer than collapsible.

IMPORTANT NOTES:

Tikka T3 Long Calibers - Only our 3.560 Metal magazines work with this version. Standard length magazine will not work with this action (without modifications to the action)

Using our Skeleton Rifle Stock - We do not recommend using our Skeleton Rifle Stock on the LSS-XL. It will work on our LSS using the fixed stock adapter. But on the LSS-XL with a shorter Length of Pull the cheek riser will be in the way of the bolt. (it does work on some actions if the cheek riser is raised

€ 670
MDT Engineered Accuracy
LSS-XL chassis System Rem 700 short action black
The LSS-XL is a larger version of our LSS chassis system. The fore end has been extended by 3", and is designed to take fixed buttstocks without the need of an adapter.

The LSS-XL chassis system is a variant of our highly popular LSS chassis. The LSS chassis was designed for compact use, short barreled rifles. A large amount of customers really liked the LSS chassis, but wanted to use a fixed buttstock, and use it with longer barrel systems.

This prompted us to design the LSS-XL chassis system which has a fore-end extended by 3" and is designed to accept fixed rifle stocks without the need of using any adapters. In addition the Lengt of Pull (LOP) is 1" shorter than the standard LSS, as fixed rifle stocks generally are longer than collapsible.

IMPORTANT NOTES:

Tikka T3 Long Calibers - Only our 3.560 Metal magazines work with this version. Standard length magazine will not work with this action (without modifications to the action)

Using our Skeleton Rifle Stock - We do not recommend using our Skeleton Rifle Stock on the LSS-XL. It will work on our LSS using the fixed stock adapter. But on the LSS-XL with a shorter Length of Pull the cheek riser will be in the way of the bolt. (it does work on some actions if the cheek riser is raised
€ 670
MDT Engineered Accuracy
HS3 Chassis system Rem 700 Long Action Black
Our HS3 Chassis system is a light (2.2lb) chassis system for bolt action rifles. Machined from aluminum, hard anodized and finished with black or FDE side panels for color, grip and feel.

Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.0 lbs and was designed based on customer feedback who wanted longer fore ends (3" longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)

The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).

This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.

The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated.

Weight: 2.0 lb
Designed for AR-15 fixed butt-stocks, including our Skeleton Rifle Stock.Carbine buttstocks also work.
Accepts any AR-15 grip, without a beavertail.
Fits AICS / AM Magazines in .223 and .308 (SA), .300WM and .338LM (LA)
Polymer sides in Black or Flat Dark Earth (FDE)
€ 660
MDT Engineered Accuracy
HS3 Chassis system Rem 700 LA FDE
Our HS3 Chassis system is a light (2.2lb) chassis system for bolt action rifles. Machined from aluminum, hard anodized and finished with black or FDE side panels for color, grip and feel.

Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.0 lbs and was designed based on customer feedback who wanted longer fore ends (3" longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)

The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).

This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.

The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated.

Weight: 2.0 lb
Designed for AR-15 fixed butt-stocks, including our Skeleton Rifle Stock.Carbine buttstocks also work.
Accepts any AR-15 grip, without a beavertail.
Fits AICS / AM Magazines in .223 and .308 (SA), .300WM and .338LM (LA)
Polymer sides in Black or Flat Dark Earth (FDE)
€ 660
MDT Engineered Accuracy
HS3 Chassis system Rem 700 Short Action RH Black
Our HS3 Chassis system is a light (2.2lb) chassis system for bolt action rifles. Machined from aluminum, hard anodized and finished with black or FDE side panels for color, grip and feel.

Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.0 lbs and was designed based on customer feedback who wanted longer fore ends (3" longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)

The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).

This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.

The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated.

Weight: 2.0 lb
Designed for AR-15 fixed butt-stocks, including our Skeleton Rifle Stock.Carbine buttstocks also work.
Accepts any AR-15 grip, without a beavertail.
Fits AICS / AM Magazines in .223 and .308 (SA), .300WM and .338LM (LA)
Polymer sides in Black or Flat Dark Earth (FDE)
€ 590
MDT Engineered Accuracy
HS3 Chassis system Rem 700 Short Action RH FDE
Our HS3 Chassis system is a light (2.2lb) chassis system for bolt action rifles. Machined from aluminum, hard anodized and finished with black or FDE side panels for color, grip and feel.

Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.0 lbs and was designed based on customer feedback who wanted longer fore ends (3" longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)

The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).

This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.

The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated.

Weight: 2.0 lb
Designed for AR-15 fixed butt-stocks, including our Skeleton Rifle Stock.Carbine buttstocks also work.
Accepts any AR-15 grip, without a beavertail.
Fits AICS / AM Magazines in .223 and .308 (SA), .300WM and .338LM (LA)
Polymer sides in Black or Flat Dark Earth (FDE)
€ 590
MDT Engineered Accuracy
HS3 Chassis system Tikka T3 Short caliber BLk
Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.0 lbs and was designed based on customer feedback who wanted longer fore ends (3" longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)

The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).

This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.

The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated.

Weight: 2.0 lb
Designed for AR-15 fixed butt-stocks, including our Skeleton Rifle Stock.Carbine buttstocks also work.
Accepts any AR-15 grip, without a beavertail.
Fits AICS / AM Magazines in .223 and .308 (SA), .300WM and .338LM (LA)
Polymer sides in Black or Flat Dark Earth (FDE)
€ 590
MDT Engineered Accuracy
HS3 Chassis system for Tikka T3 Action long caliber BLK
Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.0 lbs and was designed based on customer feedback who wanted longer fore ends (3" longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)

The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).

This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.

The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated.

Weight: 2.0 lb
Designed for AR-15 fixed butt-stocks, including our Skeleton Rifle Stock.Carbine buttstocks also work.
Accepts any AR-15 grip, without a beavertail.
Fits AICS / AM Magazines in .223 and .308 (SA), .300WM and .338LM (LA)
Polymer sides in Black or Flat Dark Earth (FDE)
€ 660
MDT Engineered Accuracy
HS3 Chassis system for Tkka T3 Short Action FDE color
Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.0 lbs and was designed based on customer feedback who wanted longer fore ends (3" longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)

The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).

This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.

The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated.

Weight: 2.0 lb
Designed for AR-15 fixed butt-stocks, including our Skeleton Rifle Stock.Carbine buttstocks also work.
Accepts any AR-15 grip, without a beavertail.
Fits AICS / AM Magazines in .223 and .308 (SA), .300WM and .338LM (LA)
Polymer sides in Black or Flat Dark Earth (FDE)
€ 590
MDT Engineered Accuracy
HS3 Chassis system for Tikka T3 long action FDE
Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.0 lbs and was designed based on customer feedback who wanted longer fore ends (3" longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)

The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).

This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.

The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated.

Weight: 2.0 lb
Designed for AR-15 fixed butt-stocks, including our Skeleton Rifle Stock.Carbine buttstocks also work.
Accepts any AR-15 grip, without a beavertail.
Fits AICS / AM Magazines in .223 and .308 (SA), .300WM and .338LM (LA)
Polymer sides in Black or Flat Dark Earth (FDE)
€ 660
MDT Engineered Accuracy
LSS Chassis System For Tikka T3 long Action BLK
DETAILS

Our LSS chassis system was designed to be as compact as possible. The V-shaped bedding and free floated fore end improve accuracy and ergonomics. The fore-end allows for barrel contours up to 1" in diameter

The chassis system is manufactured out of billet 6061-T6 aluminum, which has been hard anodized to mil spec type III for extra strenth, and has been finished with Cerakote™ in Black or Flat Dark Earth (FDE).

To keep this chassis system compact, it was designed for collapsible AR-15 buttstocks, however fixed buttstocks can mounted with the use of a fixed stock adapter.

COMPATIBILITY

The MDT LSS chassis system is currently manufactured for the following bolt action rifle platforms:

Remington 700 Short Action
Remington 700 Long Action
Remington Model 7
Remington Model 783
Savage Short Action, Models 10, 11, 12 and 16
Savage Long Action, Models 110, 111, 112 and 116
Savage Axis - Short Calibers
Tikka T3 - Short Calibers
Tikka T3 - Long Calibers. Requires MDT 3.56 Magazine.
Mossberg MVP 5.56 (.223) using AR-15 Magazines
Mossberg MVP 7.62 (.308) using AR-10 Magazines
Howa 1500 / Weahterby Vanguard - Short Calibers.
Please note important action specific information at the bottom of this page.

MOUNTING AND COMPATIBLE ACCESSORIES

The LSS chassis is designed to accept any AR-15 butt-stock and pistol grip (purchased seperately), offering the option to customize from the wide variety of Accessories available on the market.

The LSS chassis uses external box style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, and supports installation of bolt on MIL-STN-1913 accessory mounting rails. Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”) to be used on the bottom of the fore end up to 6.5" in length.

Note: Long action magazines come in 3 different lengths: 3.715", 3.775" an 8.050". Our chassis use 3.715 length magazines.

SPECIFICATIONS

Increases accuracy by up to 21%
Construction aluminum hard anodized to mil spec type III
Cerakote Finish in Black or Flat Dark Earth
Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
Designed for Collapsible AR-15 buttstocks
Accepts most AR-15 Pistol Grips
Lightweight, free-floating modular fore-end
Will accommodate barrels up to 1" diameter.
Compatible with AICS style magazines in .223 or .308 (SA) and 300WM, 30.06, 338LM (LA). (Long Action Magazine length 3.715)
Weight: 1.6lb - 1.8lb
For rifles with longer barrels to be used for long range (past 900 meters) we recommend our TAC21 or our HS3 Chassis systems.

WHAT YOU GET, AND WHAT YOU NEED

The LSS chassis system comes as a 1-piece chassis, with all required mounting hardware included. This includes new action screws, and a screw for the pistol grip.

To complete this chassis on your rifle, the additional items you need to purchase are:

Any AR-15 buttstock. For fixed buttstocks you will need the fixed stock adapter, or consider using our LSS-XL chassis.
A buffer tube for your buttstock. (Both milspec and commercial work on our chassis)
An AR-15 Pistol Grip. Ideally without a beavertail, or use a soft (bendable) beavertail.
At leas one magazine
If you prefer a longer fore-end, please also see our LSS-XL chassis System or our HS3 Chassis System.
€ 460
UTG
AK47 Ergonomic Pistol Grip, Black RB-TPG478B
Robust Design with Combat Grade Synthetic Material
Ergonomic Finger Grooves Provide Solid and Repeatable Grip
Concealed Compartment for Small Parts and Tools
Additional Hand Support Provides Stable and Easy Trigger Control
€ 18
MDT Engineered Accuracy
LSS-XL chassis System Rem 700 long action ,FDE

The LSS-XL is a larger version of our LSS chassis system. The fore end has been extended by 3", and is designed to take fixed buttstocks without the need of an adapter.

The LSS-XL chassis system is a variant of our highly popular LSS chassis. The LSS chassis was designed for compact use, short barreled rifles. A large amount of customers really liked the LSS chassis, but wanted to use a fixed buttstock, and use it with longer barrel systems.

This prompted us to design the LSS-XL chassis system which has a fore-end extended by 3" and is designed to accept fixed rifle stocks without the need of using any adapters. In addition the Lengt of Pull (LOP) is 1" shorter than the standard LSS, as fixed rifle stocks generally are longer than collapsible.

IMPORTANT NOTES:

Tikka T3 Long Calibers - Only our 3.560 Metal magazines work with this version. Standard length magazine will not work with this action (without modifications to the action)

Using our Skeleton Rifle Stock - We do not recommend using our Skeleton Rifle Stock on the LSS-XL. It will work on our LSS using the fixed stock adapter. But on the LSS-XL with a shorter Length of Pull the cheek riser will be in the way of the bolt. (it does work on some actions if the cheek riser is raised
The LSS-XL is a larger version of our LSS chassis system. The fore end has been extended by 3", and is designed to take fixed buttstocks without the need of an adapter.

The LSS-XL chassis system is a variant of our highly popular LSS chassis. The LSS chassis was designed for compact use, short barreled rifles. A large amount of customers really liked the LSS chassis, but wanted to use a fixed buttstock, and use it with longer barrel systems.

This prompted us to design the LSS-XL chassis system which has a fore-end extended by 3" and is designed to accept fixed rifle stocks without the need of using any adapters. In addition the Lengt of Pull (LOP) is 1" shorter than the standard LSS, as fixed rifle stocks generally are longer than collapsible.

IMPORTANT NOTES:

Tikka T3 Long Calibers - Only our 3.560 Metal magazines work with this version. Standard length magazine will not work with this action (without modifications to the action)

Using our Skeleton Rifle Stock - We do not recommend using our Skeleton Rifle Stock on the LSS-XL. It will work on our LSS using the fixed stock adapter. But on the LSS-XL with a shorter Length of Pull the cheek riser will be in the way of the bolt. (it does work on some actions if the cheek riser is raised
€ 670
MDT Engineered Accuracy
MDT folding Stock Adapter-collapsible
MDT's Folding Stock Adapter is designed to add a folding mechanism to the MDT Chassis systems using AR-15 buttstocks.

This version is for use with a Collapsible Stock.

Adds 0.75" to Length of Pull. Does not lock into place in folded position.
€ 157
MDT Engineered Accuracy
HS3 SAVAGE 110 111 112 116 LONG ACTION FDE
€ 660
MDT Engineered Accuracy
Enhanced Adjustable Recoil Pads for UBR
DETAILS

Three-way adjustable recoil pads for drop pitch and offset as well as length of pull, for the Remington 700. It further enhances the UBR® stock by adding the adjustability and the comfort of a soft rubber recoil pad. This is a complete module. It replaces the existing UBR® recoil pad.
€ 64.99
MDT Engineered Accuracy
LSS-XL chassis System Tikka T3 long action ,FDE
The LSS-XL is a larger version of our LSS chassis system. The fore end has been extended by 3", and is designed to take fixed buttstocks without the need of an adapter.

The LSS-XL chassis system is a variant of our highly popular LSS chassis. The LSS chassis was designed for compact use, short barreled rifles. A large amount of customers really liked the LSS chassis, but wanted to use a fixed buttstock, and use it with longer barrel systems.

This prompted us to design the LSS-XL chassis system which has a fore-end extended by 3" and is designed to accept fixed rifle stocks without the need of using any adapters. In addition the Lengt of Pull (LOP) is 1" shorter than the standard LSS, as fixed rifle stocks generally are longer than collapsible.

IMPORTANT NOTES:

Tikka T3 Long Calibers - Only our 3.560 Metal magazines work with this version. Standard length magazine will not work with this action (without modifications to the action)

Using our Skeleton Rifle Stock - We do not recommend using our Skeleton Rifle Stock on the LSS-XL. It will work on our LSS using the fixed stock adapter. But on the LSS-XL with a shorter Length of Pull the cheek riser will be in the way of the bolt. (it does work on some actions if the cheek riser is raised
€ 670
MDT Engineered Accuracy
LSS-XL chassis System Tikka T3 short action black
The LSS-XL is a larger version of our LSS chassis system. The fore end has been extended by 3", and is designed to take fixed buttstocks without the need of an adapter.

The LSS-XL chassis system is a variant of our highly popular LSS chassis. The LSS chassis was designed for compact use, short barreled rifles. A large amount of customers really liked the LSS chassis, but wanted to use a fixed buttstock, and use it with longer barrel systems.

This prompted us to design the LSS-XL chassis system which has a fore-end extended by 3" and is designed to accept fixed rifle stocks without the need of using any adapters. In addition the Lengt of Pull (LOP) is 1" shorter than the standard LSS, as fixed rifle stocks generally are longer than collapsible.

IMPORTANT NOTES:

Tikka T3 Long Calibers - Only our 3.560 Metal magazines work with this version. Standard length magazine will not work with this action (without modifications to the action)

Using our Skeleton Rifle Stock - We do not recommend using our Skeleton Rifle Stock on the LSS-XL. It will work on our LSS using the fixed stock adapter. But on the LSS-XL with a shorter Length of Pull the cheek riser will be in the way of the bolt. (it does work on some actions if the cheek riser is raised
€ 630
MDT Engineered Accuracy
LSS-XL chassis System Howa 1500 short action black
The LSS-XL is a larger version of our LSS chassis system. The fore end has been extended by 3", and is designed to take fixed buttstocks without the need of an adapter.

The LSS-XL chassis system is a variant of our highly popular LSS chassis. The LSS chassis was designed for compact use, short barreled rifles. A large amount of customers really liked the LSS chassis, but wanted to use a fixed buttstock, and use it with longer barrel systems.

This prompted us to design the LSS-XL chassis system which has a fore-end extended by 3" and is designed to accept fixed rifle stocks without the need of using any adapters. In addition the Lengt of Pull (LOP) is 1" shorter than the standard LSS, as fixed rifle stocks generally are longer than collapsible.
€ 630
MDT Engineered Accuracy
HS3 Chassis system Howa 1500 Short Action RH Black
Our HS3 Chassis system is a light (2.2lb) chassis system for bolt action rifles. Machined from aluminum, hard anodized and finished with black or FDE side panels for color, grip and feel.

Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.0 lbs and was designed based on customer feedback who wanted longer fore ends (3" longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)

The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).

This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.

The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated.

Weight: 2.0 lb
Designed for AR-15 fixed butt-stocks, including our Skeleton Rifle Stock.Carbine buttstocks also work.
Accepts any AR-15 grip, without a beavertail.
Fits AICS / AM Magazines in .223 and .308 (SA), .300WM and .338LM (LA)
Polymer sides in Black or Flat Dark Earth (FDE)
€ 590
MDT Engineered Accuracy
LSS Chassis System for Howa 1500 short Acton BLK
DETAILS

Our LSS chassis system was designed to be as compact as possible. The V-shaped bedding and free floated fore end improve accuracy and ergonomics. The fore-end allows for barrel contours up to 1" in diameter

The chassis system is manufactured out of billet 6061-T6 aluminum, which has been hard anodized to mil spec type III for extra strenth, and has been finished with Cerakote™ in Black or Flat Dark Earth (FDE).

To keep this chassis system compact, it was designed for collapsible AR-15 buttstocks, however fixed buttstocks can mounted with the use of a fixed stock adapter.

COMPATIBILITY

The MDT LSS chassis system is currently manufactured for the following bolt action rifle platforms:

Remington 700 Short Action
Remington 700 Long Action
Remington Model 7
Remington Model 783
Savage Short Action, Models 10, 11, 12 and 16
Savage Long Action, Models 110, 111, 112 and 116
Savage Axis - Short Calibers
Tikka T3 - Short Calibers
Tikka T3 - Long Calibers. Requires MDT 3.56 Magazine.
Mossberg MVP 5.56 (.223) using AR-15 Magazines
Mossberg MVP 7.62 (.308) using AR-10 Magazines
Howa 1500 / Weahterby Vanguard - Short Calibers.
Please note important action specific information at the bottom of this page.

MOUNTING AND COMPATIBLE ACCESSORIES

The LSS chassis is designed to accept any AR-15 butt-stock and pistol grip (purchased seperately), offering the option to customize from the wide variety of Accessories available on the market.

The LSS chassis uses external box style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, and supports installation of bolt on MIL-STN-1913 accessory mounting rails. Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”) to be used on the bottom of the fore end up to 6.5" in length.

Note: Long action magazines come in 3 different lengths: 3.715", 3.775" an 8.050". Our chassis use 3.715 length magazines.

SPECIFICATIONS

Increases accuracy by up to 21%
Construction aluminum hard anodized to mil spec type III
Cerakote Finish in Black or Flat Dark Earth
Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
Designed for Collapsible AR-15 buttstocks
Accepts most AR-15 Pistol Grips
Lightweight, free-floating modular fore-end
Will accommodate barrels up to 1" diameter.
Compatible with AICS style magazines in .223 or .308 (SA) and 300WM, 30.06, 338LM (LA). (Long Action Magazine length 3.715)
Weight: 1.6lb - 1.8lb
For rifles with longer barrels to be used for long range (past 900 meters) we recommend our TAC21 or our HS3 Chassis systems.

WHAT YOU GET, AND WHAT YOU NEED

The LSS chassis system comes as a 1-piece chassis, with all required mounting hardware included. This includes new action screws, and a screw for the pistol grip.

To complete this chassis on your rifle, the additional items you need to purchase are:

Any AR-15 buttstock. For fixed buttstocks you will need the fixed stock adapter, or consider using our LSS-XL chassis.
A buffer tube for your buttstock. (Both milspec and commercial work on our chassis)
An AR-15 Pistol Grip. Ideally without a beavertail, or use a soft (bendable) beavertail.
At leas one magazine
If you prefer a longer fore-end, please also see our LSS-XL chassis System or our HS3 Chassis System.
€ 425
MDT Engineered Accuracy
LSS-XL chassis System Tikka T3 Long action black
The LSS-XL is a larger version of our LSS chassis system. The fore end has been extended by 3", and is designed to take fixed buttstocks without the need of an adapter.

The LSS-XL chassis system is a variant of our highly popular LSS chassis. The LSS chassis was designed for compact use, short barreled rifles. A large amount of customers really liked the LSS chassis, but wanted to use a fixed buttstock, and use it with longer barrel systems.

This prompted us to design the LSS-XL chassis system which has a fore-end extended by 3" and is designed to accept fixed rifle stocks without the need of using any adapters. In addition the Lengt of Pull (LOP) is 1" shorter than the standard LSS, as fixed rifle stocks generally are longer than collapsible.
€ 670
MDT Engineered Accuracy
LSSshort action for TIKKA T3 fde/desert
The MDT LSS Chassis provides a lightweight and versatile platform for your Tikka. This drop-in chassis fits Short Action Tikka and accepts AICS style detachable magazines. Machined out of aluminum and finished with Cerakote, the LSS is ready to accept standard AR15 grips and collapsible stocks. Rifle receiver will only make contact with the chassis on the V-Shape bedding and recoil lug area, ensuring high accuracy and repeatability. Also, with the generous spacing on the handguard, standard and bull barrels will free float easily. Mounting holes on the forend are compatible with Magpul L5 and L3 rails. Available in black or flat dark earth. Does not accept AR15 grips with beavertail. Fixed Stock Adapter is required for use with fixed AR15 buttstocks.
€ 425
MDT Engineered Accuracy
HS3 SAVAGE 10 11 12 16 short action desert
Our HS3 Chassis system is a light (2.2lb) chassis system for bolt action rifles. Machined from aluminum, hard anodized and finished with black or FDE side panels for color, grip and feel.

Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.0 lbs and was designed based on customer feedback who wanted longer fore ends (3" longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)

The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).

This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.

The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated.

Weight: 2.0 lb
Designed for AR-15 fixed butt-stocks, including our Skeleton Rifle Stock.Carbine buttstocks also work.
Accepts any AR-15 grip, without a beavertail.
Fits AICS / AM Magazines in .223 and .308 (SA), .300WM and .338LM (LA)
Polymer sides in Black or Flat Dark Earth (FDE)
€ 590
MDT Engineered Accuracy
HS3 SAVAGE 110 111 112 116 long action black
Our HS3 Chassis system is a light (2.2lb) chassis system for bolt action rifles. Machined from aluminum, hard anodized and finished with black or FDE side panels for color, grip and feel.

Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.0 lbs and was designed based on customer feedback who wanted longer fore ends (3" longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)

The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).

This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.

The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated.

Weight: 2.0 lb
Designed for AR-15 fixed butt-stocks, including our Skeleton Rifle Stock.Carbine buttstocks also work.
Accepts any AR-15 grip, without a beavertail.
Fits AICS / AM Magazines in .223 and 300 AAC
Polymer sides in Black or Flat Dark Earth (FDE)
€ 660
MDT Engineered Accuracy
LSS-XL chassis System Howa 1500 short action FDE
The LSS-XL is a larger version of our LSS chassis system. The fore end has been extended by 3", and is designed to take fixed buttstocks without the need of an adapter.

The LSS-XL chassis system is a variant of our highly popular LSS chassis. The LSS chassis was designed for compact use, short barreled rifles. A large amount of customers really liked the LSS chassis, but wanted to use a fixed buttstock, and use it with longer barrel systems.

This prompted us to design the LSS-XL chassis system which has a fore-end extended by 3" and is designed to accept fixed rifle stocks without the need of using any adapters. In addition the Lengt of Pull (LOP) is 1" shorter than the standard LSS, as fixed rifle stocks generally are longer than collapsible.
€ 630
MDT Engineered Accuracy
LSS-XL chassis System Howa 1500 LA RH , Black
The LSS-XL is a larger version of our LSS chassis system. The fore end has been extended by 3", and is designed to take fixed buttstocks without the need of an adapter.

The LSS-XL chassis system is a variant of our highly popular LSS chassis. The LSS chassis was designed for compact use, short barreled rifles. A large amount of customers really liked the LSS chassis, but wanted to use a fixed buttstock, and use it with longer barrel systems.

This prompted us to design the LSS-XL chassis system which has a fore-end extended by 3" and is designed to accept fixed rifle stocks without the need of using any adapters. In addition the Lengt of Pull (LOP) is 1" shorter than the standard LSS, as fixed rifle stocks generally are longer than collapsible.
€ 670
MDT Engineered Accuracy
LSS Chassis System for Howa 1500 short Acton FDE
DETAILS

Our LSS chassis system was designed to be as compact as possible. The V-shaped bedding and free floated fore end improve accuracy and ergonomics. The fore-end allows for barrel contours up to 1" in diameter

The chassis system is manufactured out of billet 6061-T6 aluminum, which has been hard anodized to mil spec type III for extra strenth, and has been finished with Cerakote™ in Black or Flat Dark Earth (FDE).

To keep this chassis system compact, it was designed for collapsible AR-15 buttstocks, however fixed buttstocks can mounted with the use of a fixed stock adapter.

COMPATIBILITY

The MDT LSS chassis system is currently manufactured for the following bolt action rifle platforms:

Remington 700 Short Action
Remington 700 Long Action
Remington Model 7
Remington Model 783
Savage Short Action, Models 10, 11, 12 and 16
Savage Long Action, Models 110, 111, 112 and 116
Savage Axis - Short Calibers
Tikka T3 - Short Calibers
Tikka T3 - Long Calibers. Requires MDT 3.56 Magazine.
Mossberg MVP 5.56 (.223) using AR-15 Magazines
Mossberg MVP 7.62 (.308) using AR-10 Magazines
Howa 1500 / Weahterby Vanguard - Short Calibers.
Please note important action specific information at the bottom of this page.

MOUNTING AND COMPATIBLE ACCESSORIES

The LSS chassis is designed to accept any AR-15 butt-stock and pistol grip (purchased seperately), offering the option to customize from the wide variety of Accessories available on the market.

The LSS chassis uses external box style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, and supports installation of bolt on MIL-STN-1913 accessory mounting rails. Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”) to be used on the bottom of the fore end up to 6.5" in length.

Note: Long action magazines come in 3 different lengths: 3.715", 3.775" an 8.050". Our chassis use 3.715 length magazines.

SPECIFICATIONS

Increases accuracy by up to 21%
Construction aluminum hard anodized to mil spec type III
Cerakote Finish in Black or Flat Dark Earth
Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
Designed for Collapsible AR-15 buttstocks
Accepts most AR-15 Pistol Grips
Lightweight, free-floating modular fore-end
Will accommodate barrels up to 1" diameter.
Compatible with AICS style magazines in .223 or .308 (SA) and 300WM, 30.06, 338LM (LA). (Long Action Magazine length 3.715)
Weight: 1.6lb - 1.8lb
For rifles with longer barrels to be used for long range (past 900 meters) we recommend our TAC21 or our HS3 Chassis systems.

WHAT YOU GET, AND WHAT YOU NEED

The LSS chassis system comes as a 1-piece chassis, with all required mounting hardware included. This includes new action screws, and a screw for the pistol grip.

To complete this chassis on your rifle, the additional items you need to purchase are:

Any AR-15 buttstock. For fixed buttstocks you will need the fixed stock adapter, or consider using our LSS-XL chassis.
A buffer tube for your buttstock. (Both milspec and commercial work on our chassis)
An AR-15 Pistol Grip. Ideally without a beavertail, or use a soft (bendable) beavertail.
At leas one magazine

€ 425
MDT Engineered Accuracy
HS3 Chassis system Howa 1500 Short Action RH FDE
Our HS3 Chassis system is a light (2.2lb) chassis system for bolt action rifles. Machined from aluminum, hard anodized and finished with black or FDE side panels for color, grip and feel.

Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.0 lbs and was designed based on customer feedback who wanted longer fore ends (3" longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)

The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).

This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.

The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated.

Weight: 2.0 lb
Designed for AR-15 fixed butt-stocks, including our Skeleton Rifle Stock.Carbine buttstocks also work.
Accepts any AR-15 grip, without a beavertail.
Fits AICS / AM Magazines in .223 and .308 (SA), .300WM and .338LM (LA)
Polymer sides in Black or Flat Dark Earth (FDE)
€ 590
HOGUE
Pistol grip for Ar15/M4/M16 overmold without beavertail Black
Keep that grip secure with Hogue's AR-15 Overmolded with out Beavertail Pistol Grip. Comfort and control for your AR to keep you shooting straight.

FEATURES:

Fiberglass core; Durable and lightweight material
Overmolded rubber exterior with a beavertail, finger grooves and palm swells; provides a comfortable and superior grip surface
Retains the important lines and aesthetics of the AR; The tweaked AR still looks like an AR
AR-15 ready; Fits the AR-15/M-16 perfectly
€ 28
HOGUE
Pistol grip for Ar15/M4/M16 overmold without beavertail FDE
Keep that grip secure with Hogue's AR-15 Overmolded with out Beavertail Pistol Grip. Comfort and control for your AR to keep you shooting straight.

FEATURES:

Fiberglass core; Durable and lightweight material
Overmolded rubber exterior with a beavertail, finger grooves and palm swells; provides a comfortable and superior grip surface
Retains the important lines and aesthetics of the AR; The tweaked AR still looks like an AR
AR-15 ready; Fits the AR-15/M-16 perfectly
€ 28
Magpul
Grip foe Ar15 MOE Black
The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip. The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included. Made in U.S.A.
€ 33
MDT Engineered Accuracy
HS3 chassys for remington Mod.7' short action FDE/DESERT
Our HS3 Chassis system is a light (2.2lb) chassis system for bolt action rifles. Machined from aluminum, hard anodized and finished with black or FDE side panels for color, grip and feel.

Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.0 lbs and was designed based on customer feedback who wanted longer fore ends (3" longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)

The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).

This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.

The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated.

Weight: 2.0 lb
Designed for AR-15 fixed butt-stocks, including our Skeleton Rifle Stock.Carbine buttstocks also work.
Accepts any AR-15 grip, without a beavertail.
Fits AICS / AM Magazines in .223 and .308 (SA), .300WM and .338LM (LA)
Polymer sides in Black or Flat Dark Earth (FDE)
€ 590
MDT Engineered Accuracy
HS3 chassys for remington Mod.7' short action BLACK
Our HS3 Chassis system is a light (2.2lb) chassis system for bolt action rifles. Machined from aluminum, hard anodized and finished with black or FDE side panels for color, grip and feel.

Our HS3 (Hunter/Sniper) Chassis series is a combination of benchrest accuracy, superior ergonomics and specialized design. The new HS3 chassis brings your
bolt action rifle to the next level in versatility and ergonomics, with an instant improvement in accuracy. The chassis itself is only 2.0 lbs and was designed based on customer feedback who wanted longer fore ends (3" longer than our LSS), and use fixed rifle stocks (as compared to our LSS chassis which was designed for compact use with collapsible stocks)

The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured
out of aluminum, hard anodized to mil spec type III, and has durable Polymer side panels which can be ordered in black or Flat Dark Earth (FDE).

This chassis was designed to accept Fixed AR-15 butt-stocks and non-beavertail pistol grips. The kit does not include shoulder butt-stock and pistol grip or magazines, offering the option to customize from the wide variety available on the market.

The HS3 chassis uses AICS style magazine in .223 and .308 caliber for short action systems, and 300WM, 30.06 or .338LM for long action systems, and supports
installation of bolt on MIL-STN-1913 accessory mounting rails on the bottom and sides of the fore-end. Spacers are required to mount side rails. The mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).

The rifle action only makes contact with the HS3 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel up to the size of the action itself free floated.

Weight: 2.0 lb
Designed for AR-15 fixed butt-stocks, including our Skeleton Rifle Stock.Carbine buttstocks also work.
Accepts any AR-15 grip, without a beavertail.
Fits AICS / AM Magazines in .223 and .308 (SA), .300WM and .338LM (LA)
€ 590
MDT Engineered Accuracy
MDT Skeleton Rifle Stock Light
The Skeleton Rifle Stock Light is based of our Skeleton Rifle Stock, with a number of key differences:

50% reduction in weight
Designed for our LSS-XL and HS3 Chassis Systems
Quick adjustment on Length of Pull and Cheek Riser using a push button
Quick removal of cheek riser
Option to add a mounting rail (for use of monopod) in 2 places.
This butt-stock can be used on many AR-15 style interfaces, however there is no buffer tube at all. Therefore this cannot be used on systems where the buffer tube is needed.

Important: The Skeleton Rifle Stock Light cannot be used on our TAC21 chassis using a Remington 700.
€ 349.99
MDT Engineered Accuracy
TAC21Chassis black for Savage 10 - 11 - 12 - 16 Short Action
MDT TAC21 Savage chassis is a combination of benchrest accuracy, superior ergonomics and specialized design. This chassis brings the Savage to the next level in versatility and modularity, with an instant improvement in accuracy.
The drop-in chassis serves as a base to which the operator can add tactical components according to the desired functionality. The stock is manufactured out of aluminum hard anodized to mil spec type III, with a top full length MIL-STN-1913 accessories mounting rail. The built-in mounting rail has 20 MOA (Minutes of Angle) on the action housing and is parallel to the barrel axis on the fore-end. The TAC21™ chassis is designed to accept any AR-15 butt-stock and pistol grip (purchased seperately), offering the option to customize from the wide variety of accessories available on the market.
The TAC21 chassis uses AICS style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, and supports installation of bolt on MIL-STN-1913 accessory mounting rails on the fore-end and side of the action housing. Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”).
TAC21 chassis is engineered to minimize warping and distortion. The rifle receiver only makes contact with the TAC21 chassis on the V shape bedding and recoil lug area insuring the best accuracy and repeatability. The generous clearance on the fore-end makes any barrel (diameter up to the receiver size – 1.350”), free floating.
SPECIFICATIONS
For Savage Short Action 10- 12 - 16
Increases accuracy by up to 30%
Construction aluminum hard anodized to mil spec type III
Cerakote Finish in Black or Flat Dark Earth
20 MOA built in rail 1913
Holes for bolt on 1913 rails
Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
Lightweight, free-floating modular fore-end
Will accommodate barrels as thick as the action
AICS style magazine well for .223 or .308 (SA) and 300WM, 30.06, 338LM (LA)
Weight: 3 LB (SA) 3.5lb (LA)
€ 820
MDT Engineered Accuracy
LSS-XL chassis SAVAGE 10-11-12-16 short action desert/fde
Increase accuracy and ergonomics with our LSS-XL chassis system. The LSS-XL is a longer version of our LSS chassis system. The fore end has been extended by 3", and is designed to take fixed buttstocks without the need of an adapter.

The LSS-XL allows you to convert your bolt action rifle to a highly versatile rifle allowing you to adjust the ergonomics with the use of AR-15 buttstocks and grips, and at the same time converting it to an external box magazine fed rifle.
Savage models 10/110 11/111 12/112 16/116
For rifles with the bolt release at the bottom, the bolt release can be engaged through the side of the chassis, using a pin or tool. (Not included)
€ 630
MDT Engineered Accuracy
LSS-XL CHASSIS TIKKA T3 SHORT ACTION FDE/DESERT
The LSS-XL is a larger version of our LSS chassis system. The fore end has been extended by 3", and is designed to take fixed buttstocks without the need of an adapter.

The LSS-XL chassis system is a variant of our highly popular LSS chassis. The LSS chassis was designed for compact use, short barreled rifles. A large amount of customers really liked the LSS chassis, but wanted to use a fixed buttstock, and use it with longer barrel systems.

This prompted us to design the LSS-XL chassis system which has a fore-end extended by 3" and is designed to accept fixed rifle stocks without the need of using any adapters. In addition the Lengt of Pull (LOP) is 1" shorter than the standard LSS, as fixed rifle stocks generally are longer than collapsible.

IMPORTANT NOTES:

Tikka T3 Long Calibers - Only our 3.560 Metal magazines work with this version. Standard length magazine will not work with this action (without modifications to the action)

Using our Skeleton Rifle Stock - We do not recommend using our Skeleton Rifle Stock on the LSS-XL. It will work on our LSS using the fixed stock adapter. But on the LSS-XL with a shorter Length of Pull the cheek riser will be in the way of the bolt. (it does work on some actions if the cheek riser is raised
€ 630
MDT Engineered Accuracy
LSS RUGER SCOUT M77 BLACK
Ruger Scout

The Ruger M77 Scout LSS is only 100% compatible with the Ruger Gunsite Scout. Other SHORT ACTION M77 Mark 2 and Hawkeyes will work with modifications possibly required to the magazine, receiver, and ejector.

The Ruger Gunsite Scout in 223/5.56mm requires the use of this magazine http://shopruger.com/556-NATO-10-Round-Magazine/productinfo/90458/
€ 425
MDT Engineered Accuracy
LSS MOSSBERG 223 MVP DESERT /FDE
Mossberg MVP 5.56 (.223) using AR-15 Magazines
€ 425
MDT Engineered Accuracy
LSS MOSSBERG 223 MVP BLACK
Mossberg MVP 5.56 (.223) using AR-15 Magazines
€ 425
MDT Engineered Accuracy
LSS MOSSBERG MVP 308 BLACK
Mossberg MVP 7.62 (.308) using AR-10 Magazines
€ 425
MDT Engineered Accuracy
LSS MOSSBERG MVP 308 FDE
Mossberg MVP 7.62 (.308) using AR-10 Magazines
Aluminum construction with type III mil spec anodizing
Free floating barrel for improved accuracy
Fits Mossberg MVP in .308
Uses AR-15 style magazines in .308
Accepts any collapsible AR-15 buttstock
Fixed stock adapter accessory is available (needed for UBR installation)
Accepts AR-15 non-beavertail pistol grips
Mission Adaptable, Fully Modular
Easy installation
LSS Chassis completion kit available here
Total Chassis weight 1.6 lbs
€ 425
MDT Engineered Accuracy
LSS REMINGTON 783 FDE
Increases accuracy by up to 21%
CNC Machined from 6061 aluminum
Cerakote Finish in Black or Flat Dark Earth
Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
Designed for Collapsible AR-15 buttstocks
Accepts most AR-15 Pistol Grips
Lightweight, free-floating modular fore-end
Will accommodate barrels up to 1" diameter.
€ 425
MDT Engineered Accuracy
LSS REMINGTON 783 Black
Increases accuracy by up to 21%
CNC Machined from 6061 aluminum
Cerakote Finish in Black or Flat Dark Earth
Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
Designed for Collapsible AR-15 buttstocks
Accepts most AR-15 Pistol Grips
Lightweight, free-floating modular fore-end
Will accommodate barrels up to 1" diameter.
Compatible with AICS style magazines in .223 or .308 (SA)
€ 425
MDT Engineered Accuracy
LSS-XL chassis System Howa 1500 LA RH , FDE
The LSS-XL is a larger version of our LSS chassis system. The fore end has been extended by 3", and is designed to take fixed buttstocks without the need of an adapter.

The LSS-XL chassis system is a variant of our highly popular LSS chassis. The LSS chassis was designed for compact use, short barreled rifles. A large amount of customers really liked the LSS chassis, but wanted to use a fixed buttstock, and use it with longer barrel systems.

This prompted us to design the LSS-XL chassis system which has a fore-end extended by 3" and is designed to accept fixed rifle stocks without the need of using any adapters. In addition the Lengt of Pull (LOP) is 1" shorter than the standard LSS, as fixed rifle stocks generally are longer than collapsible.
€ 670
MDT Engineered Accuracy
LSS SAVAGE AXIS BLACK
€ 425
MDT Engineered Accuracy
LSS SAVAGE AXIS FDE
€ 425
MDT Engineered Accuracy
LSS schassis system for Howa 1500 long action FDE
€ 460
MDT Engineered Accuracy
LSS chassis system for STEYR SSG 69 FDE
€ 425
MDT Engineered Accuracy
LSS schassis system for Howa 1500 long action BLK
€ 460
MDT Engineered Accuracy
LSS-22 chassis CZ 455 22LR desert/FDE
Our LSS-22 chassis system for .22LR caliber rifles is lightweight and compact, and adopts the same footprint as the LSS. You will notice a significant improvement in accuracy due to the V-shaped bedding and free floated fore-end, which allows for barrel contours up to 1" in diameter.

The chassis system is manufactured out of billet 6061-T6 aluminum, and has been finished with Cerakote™ in Black or Flat Dark Earth (FDE).

To keep this chassis system compact, we have designed it to take collapsible AR-15 buttstocks. Fixed buttstocks can also be mounted with the use of a fixed stock adapter.

The LSS-22 uses the OEM magazine, and each chassis is compatible with all versions of its model (e.g. our 1712 chassis accommodates all Match 54 Anschutz).

Because we have lowered the buttstock interface, The Savage Mark II, CZ 455 and Ruger American are able to use iron sights with this chassis. If you are using a scope, we recommend a stock with a cheek riser.
The Savage Mark II, CZ 455 and Ruger American are able to use iron sights.
€ 425
MDT Engineered Accuracy
LSS-22 chassis CZ 455 22LR black
Our LSS-22 chassis system for .22LR caliber rifles is lightweight and compact, and adopts the same footprint as the LSS. You will notice a significant improvement in accuracy due to the V-shaped bedding and free floated fore-end, which allows for barrel contours up to 1" in diameter.

The chassis system is manufactured out of billet 6061-T6 aluminum, and has been finished with Cerakote™ in Black or Flat Dark Earth (FDE).

To keep this chassis system compact, we have designed it to take collapsible AR-15 buttstocks. Fixed buttstocks can also be mounted with the use of a fixed stock adapter.

The LSS-22 uses the OEM magazine, and each chassis is compatible with all versions of its model (e.g. our 1712 chassis accommodates all Match 54 Anschutz).

Because we have lowered the buttstock interface, The Savage Mark II, CZ 455 and Ruger American are able to use iron sights with this chassis. If you are using a scope, we recommend a stock with a cheek riser.
The Savage Mark II, CZ 455 and Ruger American are able to use iron sights.
€ 425
MDT Engineered Accuracy
LSS-22 chassis ANSHUTZ 54-1722 22LR desert/FDE
Our LSS-22 chassis system for .22LR caliber rifles is lightweight and compact, and adopts the same footprint as the LSS. You will notice a significant improvement in accuracy due to the V-shaped bedding and free floated fore-end, which allows for barrel contours up to 1" in diameter.

The chassis system is manufactured out of billet 6061-T6 aluminum, and has been finished with Cerakote™ in Black or Flat Dark Earth (FDE).

To keep this chassis system compact, we have designed it to take collapsible AR-15 buttstocks. Fixed buttstocks can also be mounted with the use of a fixed stock adapter.

The LSS-22 uses the OEM magazine, and each chassis is compatible with all versions of its model (e.g. our 1712 chassis accommodates all Match 54 Anschutz).

Because we have lowered the buttstock interface, The Savage Mark II, CZ 455 and Ruger American are able to use iron sights with this chassis. If you are using a scope, we recommend a stock with a cheek riser.

COMPATIBILITY

The MDT LSS-22 chassis system is currently manufactured for the following bolt action rifle platforms:

Ruger American
CZ 455
Browning T-Bolt
Savage Mark II
Anschutz Match 54
Anschutz Match 64
IMPORTANT NOTES

The Ruger American requires the two OEM fixing components in addition to the magazine
The Browning T-Bolt requires the OEM magazine holder in addition to the magazine
The Savage Mark II, CZ 455 and Ruger American are able to use iron sights.
MOUNTING AND COMPATIBLE ACCESSORIES

The LSS-22 chassis is designed to accept any AR-15 buttstock and pistol grip (purchased separately), and allows for customization with a wide variety of accessories.

Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”) to be used on the bottom of the fore-end.

SPECIFICATIONS

Up to 21% increase in accuracy
CNC Machined from 6061 aluminum
Cerakote Finish (in Black or Flat Dark Earth)
Hole spacing for Magpul L5 (11 slot) and L3 (7 slot) rails
Designed for collapsible AR-15 buttstocks
Accepts AR-15 pistol grips
Lightweight, free-floating modular fore-end
Accommodates barrels up to 1" diameter.
Length of pull of 11.5”-14.75” (based off Hogue stock)
Compatible with OEM Magazines
Weight: 1.6lb - 1.8lb
WHAT YOU GET, AND WHAT YOU NEED

The LSS-22 Chassis System comes as a 1-piece chassis, with all required mounting hardware included. This includes new action screws and a screw for the pistol grip.

To install this chassis on your rifle, here are some additional items you will need to purchase:

Any AR-15 buttstock. For fixed buttstocks, you will need the fixed stock adapter
A buffer tube for your buttstock (both mil-spec and commercial work with our chassis)
An AR-15 pistol grip. Ideally without a beavertail, or with a soft (bendable) beavertail
An AICS compatible magazine
€ 425
MDT Engineered Accuracy
LSS-22 chassis ANSHUTZ 54-1722 22LR black
Our LSS-22 chassis system for .22LR caliber rifles is lightweight and compact, and adopts the same footprint as the LSS. You will notice a significant improvement in accuracy due to the V-shaped bedding and free floated fore-end, which allows for barrel contours up to 1" in diameter.

The chassis system is manufactured out of billet 6061-T6 aluminum, and has been finished with Cerakote™ in Black or Flat Dark Earth (FDE).

To keep this chassis system compact, we have designed it to take collapsible AR-15 buttstocks. Fixed buttstocks can also be mounted with the use of a fixed stock adapter.

The LSS-22 uses the OEM magazine, and each chassis is compatible with all versions of its model (e.g. our 1712 chassis accommodates all Match 54 Anschutz).

Because we have lowered the buttstock interface, The Savage Mark II, CZ 455 and Ruger American are able to use iron sights with this chassis. If you are using a scope, we recommend a stock with a cheek riser.

COMPATIBILITY

The MDT LSS-22 chassis system is currently manufactured for the following bolt action rifle platforms:

Ruger American
CZ 455
Browning T-Bolt
Savage Mark II
Anschutz Match 54
Anschutz Match 64
IMPORTANT NOTES

The Ruger American requires the two OEM fixing components in addition to the magazine
The Browning T-Bolt requires the OEM magazine holder in addition to the magazine
The Savage Mark II, CZ 455 and Ruger American are able to use iron sights.
MOUNTING AND COMPATIBLE ACCESSORIES

The LSS-22 chassis is designed to accept any AR-15 buttstock and pistol grip (purchased separately), and allows for customization with a wide variety of accessories.

Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”) to be used on the bottom of the fore-end.

SPECIFICATIONS

Up to 21% increase in accuracy
CNC Machined from 6061 aluminum
Cerakote Finish (in Black or Flat Dark Earth)
Hole spacing for Magpul L5 (11 slot) and L3 (7 slot) rails
Designed for collapsible AR-15 buttstocks
Accepts AR-15 pistol grips
Lightweight, free-floating modular fore-end
Accommodates barrels up to 1" diameter.
Length of pull of 11.5”-14.75” (based off Hogue stock)
Compatible with OEM Magazines
Weight: 1.6lb - 1.8lb
WHAT YOU GET, AND WHAT YOU NEED

The LSS-22 Chassis System comes as a 1-piece chassis, with all required mounting hardware included. This includes new action screws and a screw for the pistol grip.

To install this chassis on your rifle, here are some additional items you will need to purchase:

Any AR-15 buttstock. For fixed buttstocks, you will need the fixed stock adapter
A buffer tube for your buttstock (both mil-spec and commercial work with our chassis)
An AR-15 pistol grip. Ideally without a beavertail, or with a soft (bendable) beavertail
An AICS compatible magazine
€ 425
CUSTOMER SERVICE
Contacts
©2014 Mateba Italy, All rights reserved - P.IVA 04654920265